Monitors are our primary output hardware devices. It is basically the primary device that helps us to view whatever we want to do on our PCs. So, it is crucial to pay special attention to them and their customization. When it comes to setting up a monitor, we worry so less because all the monitors come along with their base stands. So in this article, we will try to explain the most used and top-rated arms for heavy monitors.
However, if you are about to install a heavier monitor, the process might be tough for you. In that case, you might not get the ability to move your monitor screen around easily if you want. For that, a monitor arm can be very helpful.
A monitor arm for heavy monitors will allow you easily customize the position of your monitor without any hassles. This arm can easily be adjusted at different heights and directions as well.
Not only for the heavy monitors, but these arms are also great to handle the heavyweights of our Smart TVs and various other devices. These arms are made to handle those weights and most of the manufacturers will tell you how much weight your arm can handle.
So, it is important to pick the right one as per the weight of your device. These monitor arms not only handle the weight of your monitor but also allow you to easily change the direction of your monitor to your desired side.
The area covered by arms for heavy monitors will be wider and higher as compared to the normal monitor stand.
You can easily buy a monitor stand for your monitor online but the installation could be tough if you do not have proper tools with you. You can ask a professional for help and get your monitor arm fixed by them.
The main thing to consider here is to buy the right monitor arm as per your needs. We are going to know everything in this article below related to the selection process. So, make sure to keep reading until the end.
What are the Arms of the Monitor and why it’s Important for the flat or widescreen?
A monitor arm is a simple yet effective mechanical device used to attach our monitors to our desired surface. The one end would obviously be attached to the monitor and handle its weight. Whereas the second end can be attached to a wall surface or simply a table.
This will depend on the type of your arm and the weight of your monitor. If you want to install it on the wall, it would be a perfect fit for any type and kind of load.
However, if you have a lightweight FHD monitor or other display devices, installation on the table will also work great.
A monitor arm will have the basic functionality of arm movement. As per the type of arm, its arms can move from various places. Normally, you will see these arms moving from three different places.
The center part will be used to move the device up or down. Whereas, the other can be utilized to move the monitor in sidewise directions. You will also see some monitors arms with holders for two monitors. You can easily connect two monitors on these stands and they are great for multi-display setups.
Type of Monitor Arm or wide range mounts
There are several types of monitors arms or mounts that you can easily choose from. The selection will depend only on your requirements. As per your needs, you can pick the right type of mount. Also, the place of application will matter a lot. The main types of arms for heavy monitors or all types of high and low-end monitors are as follows.
Side-Clamp Desk Mounts
This type of desk mount is suitable for desk setups. They will work great if you have a strong desk with the ability to stand along with a heavy load in a particular place. These monitor arms are easily adjustable at any point on your table. The installation is also very easy.
In fact, you can install this one on your own using simply DIY. Keep a thing in mind that they are generally not made for very heavy loads.
Through-the-desk stands
This one is a perfect solution for the side-clamp-style desk mounts. Because the above one can’t handle very heavyweights, we just put a strong rode inside the table body.
The clamps are used to tighten that connection properly. This type of monitor arm will require some kind of technical work done.
If the table doesn’t have a hole, you will have to do it and then install your stand.
Wall-Mount Monitor Arm
This is the most common type of monitor arm you would normally see with various kinds of PC setups. Also, they are considered the most powerful setups for monitors.
The wall-mount monitor arms are widely used for heavy-weight installations and for vertical monitor setups. If you want to connect multiple monitors through a single arm, this type of arm would always be suggested.
Why use a monitor mounts (For screen view, additional desk space, align multiple monitors)?
There are various reasons to choose a monitor arm as compared to the normal monitor stands. The first reason is that you have a lot of room to adjust the monitor height and direction. Along with that, you get a lot of features to change the direction using simple methods.
The monitor arms are pretty strong and easy to customize and this allows us to use our computer with much more freedom.
A monitor arm can be helpful to connect your monitor with speakers at any place even where the space is very less.
If you are using a monitor arm for your monitor setup, you are going to have much more capability to adjust it on your eye level. Most of the normal monitors would stay very low from your eyes.
You may have to adjust your chair to get to that level. But, with a monitor arm, you can take your monitor to your eye level and cause less strain to your eyes as well as neck. A monitor arm will help you easily connect multiple monitors to a single-arm without taking a lot of your desk space.
You can consider these monitors arms as a perfect thing to set up a clutter-free desktop.
How to choose the right arm for a heavy or Multiple monitor (Dual Setup, Tilt Range or Raise)?
You just have to consider very less things while going for these arms. We all know that checking online reviews and specifications is important. But, there are certain other things which are surely very important here.
Total Weight capacity
Just make sure to calculate the total weight of your monitor/monitors before choosing any monitor arm. Then, check whether your approached monitor arm can handle that weight or not.
It is not a good idea to choose a low-end monitor arm that is made for very little weight for a monitor which is very heavy in weight. This could result in various accidents and damages to your monitor as well.
So, consider checking whether your monitor arm is made for those heavy weights or not.
Mounting method
As we discussed earlier, you should consider choosing a wall-mount monitor arm or a table-mount arm as per your needs. Don’t just go for any monitor arm without prior knowledge of the installation.
It might happen that you buy a table-mount arm and you are looking to install a heavy monitor.
If that hardware is not designed for that heavyweight, it may fail to work for you.
Screen Tilt
Most of the wall-mount monitor arms will be capable of turning up to a 360-degree angle. But, in some cases, this angle could be limited. So, before picking any of the products, make sure to understand the tilt requirement.
Your arm should be able to rotate at that angle for your best benefit.
Size of your monitor
If you are seeing a monitor arm offering you a certain tilt angle or vertical alignment angle, it is surely available for a monitor of a specific size.
So, consider checking the monitor size limits before you make a decision on any of the monitor arms. Do not try to connect an oversized monitor to a stand that is made for limited sizes.
VESA Mount Hole
VESA is a standard for mounting holes for the monitors. In this pattern, you get the hole positions as 75×75 or 100x100mm spaces.
So, if your monitor is complying with VESA, your mounting arm should do the same. So, make sure to confirm this thing as well before making your final decision.
List of Best Display Arms for Multiple Heavy Weight Screens (Pole and Wall Mounting Options)
Below are some of our picks for the best monitors arms for heavy monitors. You can simply go through each one and choose the right one for you. All these products are available on Amazon.
However, you can buy other products online just by following our guide.
Screen Stand Height Adjustable Arm ( Basic for low-end monitors)
This one is perhaps the best and most highly refresh rated monitor arm stand available on Amazon. This monitor is most suitable for 13 to 30 inches monitors with upto 22 pounds weight. This mount is horizontally and vertically adjustable using its bends.
The monitor is VESA compatible with a 100×100 and 75×75 mm installation plate. The monitor can easily be adjusted by -15 to 85 degrees angles.
The material used is steel and that is the reason why we are suggesting this product to you. This is a table-mount monitor arm. Consider checking it on Amazon now.
Vertical align Dual Stand for Multiple Monitor or Arms for heavy monitors Setup
This one is a free monitor stand suitable for dual monitor setups. The best thing about this stand is that it can handle 8 KGs on each of its arms. So, if you are thinking about installing two monitors, this device can help you.
This one is also VESA compatible with two mounting setups i.e. 75x75mm and 100x100mm. The mount is made up of cold-rolled steel which enables it to handle those heavyweights pretty easily.
This one is a simple stand that can be placed on your table only.
MOUNTUP Single Monitor Desk Mount, Flat Wall 180-Degree Mount
This extender arm cum monitor holder is suitable for both Smart Televisions and monitors. This arm can offer you a 180-degree motion because it is installed on a straight wall. You can easily install display devices of up to 32 inches.
Most impressively, this mount can handle a weight of up to 1.9 Kilograms. In other words, this device is a perfect option to install any kind of heavy or light-weight monitor on your wall.
This one is VESA and Non-Vesa compatible with adjustable slots of up to 100x100mm. Consider checking it out on Amazon now.
Adjustable VESA Mount Desk Stand with Clamp and Grommet Base, Table-mount monitor arm
This monitor stand is also a great product for those who are looking to install their monitors on their own. This one is basically a table-mount monitor arm that you can easily install without any professional support.
This mount can handle weights up to 9KG. It is VESA compatible with holes of 75×75 and 100×100 patterns. This monitor stand will give you a rotation capability of up to 360 degrees.
The product is made up of high-quality aluminum material. We would suggest this product a lot more to our users because of its sturdy and sleek look.
VESA Full Motion Monitor Arm, 360 dual mount for UltraWide
This monitor stand is most suitable for monitors of up to 27 inches. This one is basically a table-mount stand for dual-monitor setups. It comes with VESA compatibility and two whole patterns i.e. 75×75 and 100×100. You also get to see cable clips for effective cable management.
This one is also a dual-monitor stand that is made up of sturdy material. With this monitor arm, you get the ability to rotate the monitor by 360 degrees. Consider checking it out on Amazon now.
This monitor stand can easily be installed on your own using simple DIY. You just need a good quality table to install the clamps and you are good to go.
Final Verdict
We hope you have got all the required information about the monitor arms for heavy monitors. We hope you will now find it easy to choose the right product for you. If you have any other questions or queries related to this article, just let us know in the comment section.
We would love to hear from your side this time. You can tell us about any other article you may want to read here. We are always ready to help you with anything we can.
We keep coming with regular updates here just like this one. So, stay connected for more.
